Key Features
- Two-component, metal-filled epoxy provides high-strength repairs
- Excellent adhesion to steel, stainless steel, aluminum, and other metals
- Machinable after full cure – drill, tap, grind, and file as needed
- Withstands temperatures up to 150°C (302°F)
- Resistant to corrosion, seawater, and many chemicals
- Simple hand-mix system requires no special equipment
Technical Specifications
| Specification | Value |
|---|---|
| IMPA Code | 812351 |
| Category | Packing & Jointing |
| Form | Paste / Putty |
| Mix Ratio | 2:1 (resin : hardener) |
| Working Time | 45 minutes (at 25°C) |
| Curing Time | 24 hours to full mechanical cure |
| Maximum Continuous Temperature | 150°C (302°F) |
| Density | 2.1 g/cm³ |
| Compressive Strength | 120 MPa |
| Color | Grey |
Frequently Asked Questions
How do I apply this metal repair compound?
Clean the surface thoroughly removing oil, grease, and rust. Mix the resin and hardener at the specified ratio until uniform. Apply the putty with a putty knife or trowel, pressing firmly into the repair area. Allow to cure at room temperature for 24 hours before machining.
Can it be used on wet or underwater surfaces?
No, the surface must be dry and pre-clean for proper adhesion. For underwater repairs, use a specially designed underwater repair compound.
Is the cured material machinable?
Yes, after full cure, the material can be drilled, tapped, ground, and filed using standard tools.
What metals can it bond to?
It bonds effectively to steel, stainless steel, aluminum, copper, brass, and most other metals used in marine applications.
Inquire About This Product
Contact us for pricing, availability, and bulk orders:
📧 [Email protected by JavaScript]
📞 [Phone protected by JavaScript]